中文
English

Reasons and Handling Methods for the Failure of the Circular Bottle Labeling Machine to Label

2023-07-20
圆瓶贴标机

The round bottle labeling machine is an automatic labeling device specifically designed for labeling round bottle products, widely used in the cosmetics, food, pharmaceutical, disinfectant and other industries for full/half week labeling of various cylindrical items, such as mineral water bottles, food packaging round bottles, pharmaceutical bottles, etc; If equipped with a character particle coding machine, it can achieve functions such as labeling and printing production batch numbers at the same time.

The round bottle labeling machine avoids a series of problems such as manual labeling, low film efficiency, skewed attachment, blistering and wrinkling, and irregular attachment positions; So when operating the circular bottle labeling machine, there may be situations where the circular bottle labeling machine cannot label,

The reason why the round bottle labeling machine cannot label:

① The marking speed is too slow, increase the marking speed

② The reserved label is not long enough, adjust the length of the reserved label

③ The measuring object electric eye is too far from the marking end and the spacing is too small, so adjust the speed of the clamping belt higher

The handling method for the round bottle labeling machine not being labeled:

1、 Increase the viscosity of the label. To achieve this effect, the solution is:

(1) Improve the surface quality of the pasted product. Most products have excessively smooth surfaces, which can increase the difficulty of labeling;

(2) Increase the labeling pressure during the labeling process;

(3) Increase the labeling temperature. It will improve the labeling effect because as the temperature increases, the activity of internal substances in the product will increase, making it easier for the label to be affixed;

(4) Increase the number of times to cover the label, such as rotating twice during the roll and stick method.

2、 Try to use soft label materials as much as possible, and good label ductility will also greatly improve label warping.

3、 Change the method of making adhesive. One is to use a sol with better viscosity for production, and the other is to change the label production process, etc;

4、 Eliminate the impact of static electricity. The labeling process is prone to generating static electricity, which can have an impact on the labeling effect. Properly increasing the humidity at the labeling site can have a certain improvement, and using an ion blower is also an effective solution.

share