中文
English

operating instructions for labeling machine

2023-07-20
It is believed that with the exhibition of mobile equipment, we will open a Yangsheng for the equipment in the labeling machine area. Although we know this equipment, there are still many people who don‘t know the specifications for using this equipment. Let‘s follow the editor of Bogao Intelligent Equipment to see what we need to pay attention to in the operation of the labeling machine!

1. Remove all sundries on the machine before starting the machine. Pay special attention to the vicinity of the moving parts, and do not place tools, rags and other articles.
2. Operators must be trained before taking up their posts, and non-operators are not allowed to operate.
3. The startup personnel shall observe whether there is anyone approaching the moving part of the machine before starting the machine. Only when it is confirmed that all personnel will not touch the moving part of the machine, can the machine be started. All personnel shall be reminded when starting the machine.
4. When the machine is running, the operator should press the emergency stop switch in time and inform the maintenance worker to repair if there is any abnormal situation.
5. Turn on the emergency stop switch. When restarting, you must pay attention to the surrounding environment (including personnel, equipment and transmission parts) to be in a safe state, otherwise you cannot start the machine.
6. When the machine is disassembled or cleaned, the emergency stop button must be pressed to avoid misoperation. It is not allowed to carry out any abnormal operation when the machine is running.
7. When cleaning the machine, pay attention not to let water enter the electric panel, the power input and the electrical components, so as to avoid damaging the components or endangering personal safety.
8. Power shall be cut off, electricity shall be checked, tags shall be hung and locks shall be locked when repairing equipment or brushing equipment.
9. It is not allowed to remove or change the parts on the machine without permission, especially the safety protection parts.
10. When it is restarted after maintenance, in addition to cleaning the site, it is necessary to manually turn the moving parts or operate by inching to see if there is any obstacle.
11. Turn off the power supply when the operator leaves the working area of the machine.
12. If any fault is found during operation, the repairman shall be informed in time, and the machine is not allowed to work with faults.

    The above content is a small series to share with you the labeling machine operation instructions, in the machine operation we must pay attention to the standard use in order to avoid other unnecessary trouble, especially pay attention to the safety of electricity, in the first use must first look at the instructions to see how to operate, do not only rely on their own feelings to operate, so not only easy to become machine damage, It also delays production, and there will be some potential safety hazards. I hope you will pay attention! Finally, I hope everyone‘s business is booming! Make money!!!
share